SharpRemoteControl2 1.0.1

SharpRemoteControl allows control of various types of Sharp TVs over IP. To use the program with your LC70C8470U, LC60C8470U, LC70C7450U, and LC60C7450U TVs, refer to the 2nd and 3rd pages. Incompatibilities may arise when using the program with these TV models, as they are not commonly found in Europe and have not undergone official functionality testing. If issues arise, please contact the developer via email at [email protected].

For European models such as LC40-46LE830ETV-RU and LE831E-RU_OM_GB, navigate to the 1st page for optimal compatibility. The program is confirmed to be fully functional with most European Sharp TV models.

To switch screens, utilize horizontal gestures on your device. Ensure your phone is connected to the same network via wifi for proper operation. Remember that functionality might be restricted by TV firmware.

Short Tutorial:

1. First Step
TV Setup: IP Configuration Go to “Menu” > “Setup” > “View setting” > “Network setup” > “IP setup” Configure the IP settings as follows: IP address: Netmask: Gateway: DNS: MAC:
2. Second Step
TV Setup: IP Control Configuration Go to “Menu” > “Setup” > “View setting” > “Network setup” > “IP Control setup” > Select “Change”. To enable IP Control, choose “Enable”. Set the device name. Enter login ID (empty) and password (empty). Set the port for IP Control to 10002. Confirm the settings and press “OK”.
3. Third Step
Phone Setup Connect your phone to the wifi network., Configure SharpRemoteControl app by setting:, IP Port: 10002, IP Address: for example, 192.168.1.110 (must match the TV's address), Initiate SharpRemoteControl.,